No.Specification |
SN -S Series Infusion pump |
Infusion Mode |
SN-S1: Fully extruded type, Speed Mode, Drip Mode, Body-weight Mode, Time Mode, Sequence Mode, Micro Mode, Gradient Mode |
Infusion Set |
20d/mI,60d/ml |
Infusion type |
SN-S1 Series is fully extruded peristaltic infusion; SN-S2 Series is half extruded peristaltic infusion. |
Accuracy of flow rate |
+5% or 3d/min |
Flow Rate |
20d/ml IV set flow rate range |
Micro Mode:0.1mI/h-100.0 ml/h |
Speed Mode:0.1mI/h-1500.0 ml/h |
Drip Mode: 1 d/min-400 d/min |
60d/ml IV set flow rate range |
Micro Mode. 0.1mI/h-150.0 ml/h |
Speed Mode: 0.1ml/h-200.0 ml/h |
Drip Mode. 1 d/min-200 d/min |
Preset Volume |
0.01-9999.99mI, increment: 0.01ml |
Delivered Volume |
0.01-9999.99mI, increment: 0.01mI |
KVO |
0.1-5mI/h |
BOLUS |
5-1500mI/h |
Bubble Dectector |
Bubble Detector in 8 level: |
Level 1. 25uI |
Level 2: 50uI |
Level 3: 100ul |
Level 4: 200ul |
Level 5: 300ul |
Level 6: 400ul |
Level 7: 500ul |
Level 8: 800uI |
Default: Level 3 |
Occlusion Detector Pressure |
The alarm threshold is between 13.3kPa-120kPa with 12 levels divided linearly; The default level is 5 in Micro mode, The default level is 8 in other infusion mode. |
History |
More than 2000pcs |
Special Function |
Supporting pump stackable with working station, Relay infusion, Keypad Lock, Adjusting rate on infusion, Release pressure automatically, Peristaltic pump can be taken off to clean, Anti-retract detector, Drug library |
Alarms |
Operation Timeout Alarm, Nearly Empty Alarm, Non-calibration of infuion set, Occlusion, Bubble, Door open, Finish, KVO Finish, Drip sensor abnormal, No AC Power,Battery Low, Battery Exhausted, System Error, System Power Error,Over Limit, Drip clamp not closed, Not installed battery, Infusion speed abnormal |
Communication |
RS485 WIFI |
Protection Class |
Class Il,Type CF,IP33 |
DimensionMeight |
287”168”82(mm ),2.1KG |
Interface |
DC Power interface, General Communication Interface I Nurse call, RS485 |
Power |
a. AC Adapter |
Input: 100-240Va.c,50/60Hz,40VA |
Output: 15Vd.c,2.0A |
b. DC Power: DC 12V |
c. Battery: 7.4V Li, 2600mAh or 5200mAh |
Recharging time: Approx 8 hours when power on; Approx 4 hours when power off |
Battery operating time: |
10 hours@5200mAh at 25ml/h |
5 hours@2600mAh at 25mI/h |
Environment |
Operating condition: |
Ambient Temperature: +5 ”C~+40″C , |
Relative Humidity: 15%~95% (Non-condensed) |
Pressure: 57.0 kPa ~ 106.0kPa, ≤ 3000m Altitude |
Storage condition: |
Ambient Temperature: − 40 “C~+70”C , |
Relative Humidity: 10% ~ 98% (Non-condensed ) |
Pressure: 50.0 kPa ~ 106.0kPa |